DIY Solar Panel Kit- 72 pcs Tested Mono Crystalline Solar Cells 3.5w - 4w + Wire Flux Diodes
Product Description
DIY Solar Panel Kit - 72 pcs Mono 6x6 Solar Cells with Accessories
The power output of these mono crystalline solar cells ranges between 3.5 watts to 4 watts per cell. We flash test each individual cell with our solar cell tester.
This set of new 6"x6" solar cells are mono crystalline cells made by an American solar company that has produced solar products in the United States for decades.
DIY KIT Technical Data:
I. Cells: 72 pieces plus some bonus solar cells
The standard cell specifications are the following, though the individual cells can be above or below these standards.
Cell Specifications:
Rated power : ~Average 3.8 Wp
Open circuit voltage: 0.610v -0.621v
Short circuit current: 5.91 amp -6.12 amp
Operating voltage: 0.519 v - 0.528 v
Operating current: 5.02 amp - 5.22 amp
Dimension: nearly 6 inches by 6 inches or 156mm by 156mm
Weight: Just above 6 grams, or 0.2 oz.
II: Tabbing wires: $30 value - 220 feet of tabbing wires to connect the solar cells. Cut them into 6 inch sections to solder onto the bus bars on the cells.
III: Bus wires: $15 value - 22 feet of bus wires. Use them to connect them between the series and connect the tabbing wires ends to the junction box at the back of the panel.
IV: Flux: $7-$9 value - an easy-to-use flux pen that dispenses flux onto the bus bar or your tabbing wires without leaving a mess. It's used to aid soldering and bonding of the wires to the cells. A must have item.
V: Diodes: $3 value - 2 diodes rated at 15 amp. Schottky style diodes.
100% Satisfaction Guaranteed!
No comments:
Post a Comment